2018년도 MCIK 응용 유변학 정기 세미나 - 제약 생물의학 식품 및 전자 부분 응용 유변학 특별 세미나 ~ McARIS

관리자

ㅇ2.png

Re: 유변학 기초 및 응용 관련 세미나 공지 


(MCIK Annual Seminar in 2018: 


Practical Approach on Industrial Rheology and 


Rheometry with Special Focus on Pharmaceutical, 


Biomedical, Food and Electronic Applications 제약, 


생물의학, 식품 및 전자 부분 응용 유변학 특별 세미나 ) - MCIK





저희 엠씨아이케이 주식회사에서는 국내 응용 유변학 (Applied Rheology)


의 저변 확대와 그동안 고객 여러분의 성원에 답하고자 2018 년도 


제약, 생물의학, 식품 및 전자 부분 응용 관련 


Annual Rheology Seminar 를 아래와 같이 개최하오니 관심


있으신 분들의 많은 참여 부탁 드립니다.

 



1. 행 사 명 :   2018년 유변학 정기 세미나 


(제약, 생물의학, 식품 및 전자 부분 응용 부분 특집)




2. 주     최 :   MCIK Center for Applied Rheology & Interface Science ( McARIS) 

/ 독일 Thermo Electron (Karlsruhe ) GmbH




3. 일     시 :   2018년 11월 8일 (목)  9:30 AM - 4:30 PM




4. 장     소 :   서울 서초구 외교센터 빌딩 2층 203호 


( 지하철 3호선 양재역에 하차 8번출구 예술의 전당 방면 도보 5분 ) 


    - 외교센터 (http://diplomatic.dic.co.kr/

       

    유로 주차장 1일 20,000 원 (사전 신고시에 한함)




ㅇ221.gif

 

ㅇ22.gif

 

연락처

주소: 서울특별시 서초구 남부순환로 2558 (서초동) 외교센터빌딩 205호 대림산업(주) 외교센터사업소





5. 참 가 비:   무 료 (점심 식사는 제공되지 않습니다.)




6. 접수 마감일:   2018년 11월 06일 화요일 5:00 PM 

        

  (한정된 좌석 사정으로 등록 순서대로 참가증을 교부 합니다)




7. 참가신청방법:    참가신청서를 엠씨아이케이 주식회사 에 우편, Fax 또는 E-mail 로 송부

                   * 참가신청서: 첨부 파일




8. 접수 및 문의:   엠씨아이케이 주식회사 사업 지원부


      Tel: 02-3143-2740 / 1979, Fax: 02-3143-2753, E-mail: infor@mcik.co.kr


              담당: 이슬기 과장




9. 강연 및 강사

123.png



Speaker:

Dr. Klaus Oldorp

Senior Application Specialist, Thermo Electron (Kalrsruhe) GmbH, Germany



1994             Ph.D. on polymer rheology, University of Hamburg, Germany

1993 - 1997  Project leader Synthetic resins, Fraunhofer Research Institute for Wood Research,

Braunschweig, Germany

1998 - 2001  Occupatinal Health and safety Expert, ICI Polyurethanes (later Huntsman Polyurethanes),

Everberg, Belgium

2002 - 2003 Independent Consultant, Belgium

2003 -         Senior Application Specailist, Thermo Fisher Scientific, Kalsruhe





Speaker:         김승록 박사 ( 엠씨아이케이 주식회사 대표 이사 )


Dr. Kim has obtained his Ph.D. in Applied Chemistry from the Centre for Applied Colloid & BioColloid Science (Swinburne University of Technology) in Melbourne in 1994. Following his Ph.D candidature, he accepeted a position as a post-doctoral fellow for 2 1/2 years in the area of rheology and polymers. He continued his research work as a postdoctoral research fellow for both the Rheology and Materail Processing centre and the Polymer Technology Centre at the Royal Melbourne Institue of Technology (R.M.I.T). He then worked as a senior research fellow at Kwangwoon University in Seoul and has also worked as a lecturer at the Yeonsei and Samyook Universities in Korea. Dr. Seungrok Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002. Dr. Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002. Dr. Kim established MCIK in early March of 2002. This has been sought after his determination in applying his profound MC knowledge into real cases with regard to a wide range of rheology and material characterization related scientific and technological problems.





독일 Thermo Electron 사 의 Haake RheoWin Programe 및 관련 산업체 시료를 이용한 시험 결과 및 비디오 교재등을 이용하여 유변학적인 방법을 이용한 Hot melt extrusion (HME) 공정에 사용되는 재료, Hyaluronic acid 등 Hyadrogel Filler, 현탁액, Emulsion, Pastes 및 Composite 내 입자의 분산성 및 분포성 향상 및 최적 시료 Formulation 의 유변학적 파악과 유변학적 최적 작업 조건 도출 및 효율성 있는 QC 방법 개발 등 산업체의 다양한 Applications 과 관련되어 시도되는 유변학 기초 강연 및 관련 이론의 산업체 응용을 위한 Forum. 


Rheology 기초 이론의 소개 및 관련 산업체의 다양한 재료를 사용한 실제 시험에의 응용 과정등을 소개하고 도출된 시험 결과의 해석 및 응용 사례등을 소개하게 됩니다.


유변학 시험 결과의 정확한 해석을 위해 시도되는 Particle morphology, 결정화 분석, 접촉각, 표면장력 및 제타 포텐셜등 보족적인 다양한 종류의 시험 방법에 대한 소개 및 목표로 하는 분산성 및 분포성이 뛰어난 재료의 진단 방법 등 응용 방법 관련 질의를 받아 가면서 진행하여 Rheology 이론 및 실제 시험에의 응용을 위한 유익한 Forum 이 될 것입니다.







*2018년 11월 08일 (목)   9:30 AM - 4:30 PM





(1)   09:30 - 10:50  강좌 1   (Dr. Klaus Oldorp)


-       Part-1. Basics of Rotational Rheological Mesurements - 1 : 

Steady Shear Rotational Rheological Measurements

        Rotational rheometers & Steady shear measurements 



-       Part-2. Basics of Rotational Rheological Mesurements - 2 : 

Optical rheology and elongational rheology

        Optical rheology measurements & CaBER measurements for extensional rheology




 


  10:50 - 11:05  Coffee Break





(2)   11:05 - 12:35  강좌 2   (Dr. SR Kim)


-       Part-3. Biogels 의 공정 가공 유동성 및 분자 구조 특성 규명에 사용되는 Steady


Shear Rotational Rheological Measurements 

Comparison of rheometer data against spindle viscometer test data, 

Flow curves and constitutive equation fitting.

Thixotropy and time dependent measurements 

Characterization of Gel Kinetics by suing a steady shere rheometry

Yeild stress determination

Axial measurements (tack measurements ) 

Vane test methods

Making use of rheological models

Importance of colloid & surface chemistry for rheology

Introduction of various methods used to help interpretation of rheological testing

data (surface chemistry, DVLO and zeta potential etc..)

Particle mechanics for rheology

On-line monitoring of rheological parmeters and particle aggregation information

                                


-       Part-4. 유변 특성 및 시료 내부 미세구조 특성 연구를 위한 Steady


Shear Rotational Rheological Measurements 에 보족적으로 사용 가능한 시험 방법

Optical rheology measurements 

Transmission & backscattering optical measurement

Rheology & Spectroscopy ( Raman & FT-IR )

Stability & aging analysis



 



  12:35 - 14:00  Lunch





(3)   14:00 - 15:30  강좌 3   (Dr. Klaus Oldorp)


-       Part-5. Basics of Rotational Rheological Measurements - II: Viscoelasticity

Dynamic Oscillatory Measurements (DOM)

Linear viscoelasticity

Molecular structural analysis via DOM

Dynamic mechanical thermal analysis (solid specimen torsional DMA testing)

Creep & recovery

Test and data evaluation using Lissajous plots

Simultaneous UV and Thermal Assisted Rheological Testing

Polymer molecular structural analysis via DOM

Spectroscopical insight into rheology with an on-line FT-IR & Raman spectroscopy


  

 



  15:30 - 15:45  Coffee Break





(4)   15:45 - 16:30  강좌 4   (Dr. SR Kim)


-       Part-6. Rheology Application Tips (Viscoelasticity)


Useful topics having industrial significance (dispersion and levelling etc.)

Useful rheological topics having industrial significance

Extrusion and or spheronization trials to make pellets & granules

Torque Rheometry as a valuable formulation development,
   formulation research and production quality control tool.

Pharmaceutical Hot Melt Extrusion (HME)

Solubility enhancement & Crystalization